# Power consumption on Arduino MKR GSM 1400 **URL:** \ **Category:** Tips & tricks\ **Created:** [March 6, 2019, 11:57am UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271 "2019-03-06T11:57:33Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![kbhargava](https://avatars.discourse-cdn.com/v4/letter/k/ed8c4c/32.png) [@kbhargava](https://forum.qoitech.com/u/kbhargava)\ **Post date:** [March 6, 2019, 11:57am UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/1 "2019-03-06T11:57:33Z")
Hi, I connected my Arduino MKR GSM 1400 to the OTII arc using external power supply (7.5V from an adapter) through the 7-9V port, and connected it to the computer using USB port to supply 3.7V. The current that I measure in the idle state (using both ArduinoLowPower and RTCZero library) is about 9-10mA after pulling up the floating pins as suggested. This value is much higher than the 3mA as suggested in your video ([DIY Water Level Indicator - Improving battery life up to 40 times, Part 2 - YouTube](https://www.youtube.com/watch?v=YVho42UC43Q&t=156s)). Could you kindly advice what I’m doing wrong here to get an idle current so high? Thanks and Regards, ---
**Author:** ![marc](https://avatars.discourse-cdn.com/v4/letter/m/8dc957/32.png) [@marc](https://forum.qoitech.com/u/marc)\ **Post date:** [March 6, 2019, 3:13pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/2 "2019-03-06T15:13:27Z")
Hi, It took some work to minimize the power consumption. I’ll dig up the old code and doublecheck it first, and if power consumption looks OK I’ll share the setup with you. Will try to come back on this tomorrow Thursday. /Marc ---
**Author:** ![kbhargava](https://avatars.discourse-cdn.com/v4/letter/k/ed8c4c/32.png) [@kbhargava](https://forum.qoitech.com/u/kbhargava)\ **Post date:** [March 6, 2019, 3:22pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/3 "2019-03-06T15:22:15Z")
Hi Mark, Thanks a lot. I look forward to what you find. Regards ---
**Author:** ![marc](https://avatars.discourse-cdn.com/v4/letter/m/8dc957/32.png) [@marc](https://forum.qoitech.com/u/marc)\ **Post date:** [March 6, 2019, 3:24pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/4 "2019-03-06T15:24:10Z")
No problem. I found the HW and fired it up, but it’s another sketch that consumes 44mA, so need to find the power optimized version first. ---
**Author:** ![marc](https://avatars.discourse-cdn.com/v4/letter/m/8dc957/32.png) [@marc](https://forum.qoitech.com/u/marc)\ **Post date:** [March 7, 2019, 2:17pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/5 "2019-03-07T14:17:04Z")
Hi, seems original code disappeared with my previous laptop, but I had some junk code laying around and could re-create it. I attach the measurements here, about 3.07 mA in sleep mode. The trick seems to be to put the SAMD21 to sleep properly. If you open a case in our case system I’ll give you the (very ugly) code as well.[MKR1400 - 3mA.otii](https://europe1.discourse-cdn.com/flex017/uploads/qoitech/original/1X/842d82cadc054b2ad387faa0664e806c2a4810d2.otii) (1.2 MB) ---
**Author:** ![kbhargava](https://avatars.discourse-cdn.com/v4/letter/k/ed8c4c/32.png) [@kbhargava](https://forum.qoitech.com/u/kbhargava)\ **Post date:** [March 7, 2019, 4:10pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/6 "2019-03-07T16:10:38Z")
Hi Marc, It would be a huge help if you could kindly share the rough code. We are running a bit stretched on deadlines so would really appreciate if you could share it at your earliest convenience. Is there a procedure to open a case? ---
**Author:** ![kbhargava](https://avatars.discourse-cdn.com/v4/letter/k/ed8c4c/32.png) [@kbhargava](https://forum.qoitech.com/u/kbhargava)\ **Post date:** [March 7, 2019, 4:15pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/7 "2019-03-07T16:15:16Z")
Hi Marc, I’ve created a new case titled ’ Standby mode power consumption’. Please let me know once you have an update. Thanks and regards. ---
**Author:** ![kbhargava](https://avatars.discourse-cdn.com/v4/letter/k/ed8c4c/32.png) [@kbhargava](https://forum.qoitech.com/u/kbhargava)\ **Post date:** [March 8, 2019, 9:20am UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/8 "2019-03-08T09:20:50Z")
Hi Marc, Thanks so much for sharing the code. I’ll get on with it today and let you know if I find any success. 🙂 Regards. ---
**Author:** ![flipthesis](https://avatars.discourse-cdn.com/v4/letter/f/e47c2d/32.png) [@flipthesis](https://forum.qoitech.com/u/flipthesis)\ **Post date:** [April 7, 2020, 11:46pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/9 "2020-04-07T23:46:39Z")
Hi there! I’m following up on this, as I am working on a similar project, and am having readings consistent with kbhargava with my MKR GSM 1400. I would appreciate the code for putting the SAMD unit to sleep. Thanks! ---
**Author:** ![bjorn.rosqvist](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.qoitech.com/bjorn.rosqvist/32/238_2.png) [@bjorn.rosqvist](https://forum.qoitech.com/u/bjorn.rosqvist)\ **Post date:** [April 8, 2020, 1:34pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/10 "2020-04-08T13:34:28Z")
Hi flipthesis and welcome to the forum. If you, or anyone else are interested in the quickly written code, then create a [case](https://www.qoitech.com/my/cases) in our case system. Refer the case to MKR GSM 1400. Best regards, Björn ---
**Author:** ![flipthesis](https://avatars.discourse-cdn.com/v4/letter/f/e47c2d/32.png) [@flipthesis](https://forum.qoitech.com/u/flipthesis)\ **Post date:** [April 10, 2020, 6:27pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/11 "2020-04-10T18:27:58Z")
Hi Bjorn! I’ve submitted a case a few days ago now, but am not quite sure what you mean by referring the case to MKR GSM 1400? Would love to get some input! ---
**Author:** ![bjorn.rosqvist](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.qoitech.com/bjorn.rosqvist/32/238_2.png) [@bjorn.rosqvist](https://forum.qoitech.com/u/bjorn.rosqvist)\ **Post date:** [April 14, 2020, 6:06am UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/12 "2020-04-14T06:06:49Z")
Hi, Thank you for the case. I have sent you some information. I hope this helps! Best regards, Björn ---
**Author:** ![cucicov](https://avatars.discourse-cdn.com/v4/letter/c/a698b9/32.png) [@cucicov](https://forum.qoitech.com/u/cucicov)\ **Post date:** [October 14, 2021, 6:49am UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/13 "2021-10-14T06:49:59Z")
Hi bjorn, i opened a case as you adviced, do you still have that code and can help me ? ---
**Author:** ![bjorn.rosqvist](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.qoitech.com/bjorn.rosqvist/32/238_2.png) [@bjorn.rosqvist](https://forum.qoitech.com/u/bjorn.rosqvist)\ **Post date:** [October 14, 2021, 6:53am UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/14 "2021-10-14T06:53:18Z")
Hi, Yes, I saw the case and have sent you all the information. I hope it helps you out. Best regards, Björn ---
**Author:** ![desilagace](https://avatars.discourse-cdn.com/v4/letter/d/48db29/32.png) [@desilagace](https://forum.qoitech.com/u/desilagace)\ **Post date:** [July 30, 2024, 6:36pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/16 "2024-07-30T18:36:21Z")
Hello, I have opened a case for the low power mode code. Would this still be available? Thank you. ---
**Author:** ![bjorn.rosqvist](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.qoitech.com/bjorn.rosqvist/32/238_2.png) [@bjorn.rosqvist](https://forum.qoitech.com/u/bjorn.rosqvist)\ **Post date:** [August 13, 2024, 1:37pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/17 "2024-08-13T13:37:21Z")
Hi, I have sent you the data. Best regards, Björn ---
**Author:** ![desilagace](https://avatars.discourse-cdn.com/v4/letter/d/48db29/32.png) [@desilagace](https://forum.qoitech.com/u/desilagace)\ **Post date:** [August 13, 2024, 2:40pm UTC](https://forum.qoitech.com/t/power-consumption-on-arduino-mkr-gsm-1400/271/18 "2024-08-13T14:40:14Z")
Thank you! This is a great help. Desmond