# Project\_stop\_recording on Falling Edge/UART Output **URL:** \ **Category:** Automation Toolbox\ **Created:** [September 6, 2024, 7:18pm UTC](https://forum.qoitech.com/t/project-stop-recording-on-falling-edge-uart-output/508 "2024-09-06T19:18:26Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![moultriemobile](https://avatars.discourse-cdn.com/v4/letter/m/848f3c/32.png) [@moultriemobile](https://forum.qoitech.com/u/moultriemobile)\ **Post date:** [September 6, 2024, 7:18pm UTC](https://forum.qoitech.com/t/project-stop-recording-on-falling-edge-uart-output/508/1 "2024-09-06T19:18:27Z")
Is it possible to trigger project\_stop\_recording based on a falling edge of the current/power measurement? (ex. stop recording when power falls below 10 mA) Is it possible to trigger it based on UART outputs? (ex. stop recording when sleep=True is outputted to the UART) ---
**Author:** ![bjorn.rosqvist](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.qoitech.com/bjorn.rosqvist/32/238_2.png) [@bjorn.rosqvist](https://forum.qoitech.com/u/bjorn.rosqvist)\ **Post date:** [September 9, 2024, 5:55am UTC](https://forum.qoitech.com/t/project-stop-recording-on-falling-edge-uart-output/508/2 "2024-09-09T05:55:25Z")
Hi and welcome to the forum. Yes, you can trigg stop recording in many ways using our Automation Toolbox add-on. > **[Automation Toolbox - Otii by Qoitech](https://www.qoitech.com/automation-toolbox/)** > > Automate your sanity checks, or use it for automated testing in software and hardware verification (e.g. continuous integration) and production. Upgrade your quality assurance. With this software license, you can, while recording, process data and take decision. I am happy to do a demo if you are interested. Look for a suitable time in our demo calendar: > **[Qoitech | Demo](https://www.qoitech.com/demo/)** > > Book a demo with our experts in energy optimization, battery simulation/testing and automated measurements. Find the best fit for your team. Best regards, Björn