Hi,
Is there any documentation or examples related with the usage of each pin of the pin header?
Does anyone has the male partnumber fitting into the female 7x2? Jumper wires are fine for quick test but for a robust test a connector would be better.
Thanks.
Hi,
First of all, the plug that will fit the expansion connector is either an IDC connector such as this one: https://www.digikey.com/product-detail/en/on-shore-technology-inc/101-146/ED10501-ND/2794213 or if you want a PCB-mounted version something like this: https://www.digikey.com/product-detail/en/sullins-connector-solutions/SFH11-PBPC-D07-RA-BK/S9203-ND/1990096
Some resources to be used as starting points:
https://www.qoitech.com/help/otii/hardware
Short video regarding GPO pins: What is the purpose of the General Purpose Output Pins in the Otii Arc? - YouTube
Short video regarding GPI and Sense+/- pins : GPI pins in the expansion connector - YouTube
Scripting using GPI pins: How to use Expansion Port GPIO pins to trigger power consumption measurements - Qoitech
UART RX pin: Synchronizing debug logs & power consumption - Qoitech
Some information regarding the ADC+/- pins: Concurrent system and subsystem power measurements with Otii - Qoitech