I have one of the good old Otii devices that I have not been using for a couple of years, so I wanted to firmware upgrade it. However, this has given some unexpected issues.
I have both tried to firmware upgrade it from Otii 2 and Otii 3.
The output from the log from Otii 2 looks like this:
Sat Dec 23 22:17:16 2023 I: Starting “2.8.4”
Sat Dec 23 22:17:18 2023 W: : QML QQuickLayoutAttached: Binding loop detected for property “preferredHeight”
Sat Dec 23 22:17:18 2023 I: Device added: “1”
Sat Dec 23 22:17:18 2023 I: Initialized device: “UART”
Sat Dec 23 22:17:18 2023 I: Added device: “UART”
Sat Dec 23 22:17:19 2023 I: Otii already latest version: 2.8.4
Sat Dec 23 22:17:48 2023 I: Device in firmware upgrade mode added: “COM10”
Sat Dec 23 22:19:03 2023 I: Upgrading Arc connected to: “COM10”
Sat Dec 23 22:19:03 2023 I: “"C:/Program Files/otii/bossac" --port COM10 -i -e -w -v -b -R -U true -u "C:/Users/fodbo/Downloads/Arc_1.1.6.bin"”
Sat Dec 23 22:19:06 2023 I: “Atmel SMART device 0x285e0a60 found”
Sat Dec 23 22:19:06 2023 I: “Device : ATSAM3X8”
Sat Dec 23 22:19:06 2023 I: “Chip ID : 285e0a60”
Sat Dec 23 22:19:06 2023 I: “Version : v1.1 Dec 15 2010 19:25:04”
Sat Dec 23 22:19:06 2023 I: “Address : 524288”
Sat Dec 23 22:19:06 2023 I: “Pages : 2048”
Sat Dec 23 22:19:06 2023 I: “Page Size : 256 bytes”
Sat Dec 23 22:19:06 2023 I: “Total Size : 512KB”
Sat Dec 23 22:19:06 2023 I: “Planes : 2”
Sat Dec 23 22:19:06 2023 I: “Lock Regions : 32”
Sat Dec 23 22:19:06 2023 I: “Locked : none”
Sat Dec 23 22:19:06 2023 I: “Security : false”
Sat Dec 23 22:19:06 2023 I: “Boot Flash : false”
Sat Dec 23 22:19:06 2023 I: “Unlock all regions”
Sat Dec 23 22:19:06 2023 I: “Erase flash”
Sat Dec 23 22:19:06 2023 I: “done in 0.029 seconds”
Sat Dec 23 22:19:06 2023 I: “”
Sat Dec 23 22:19:06 2023 I: “Write 108500 bytes to flash (424 pages)”
Sat Dec 23 22:19:06 2023 I: “[ ] 0% (0/424 pages)”
Sat Dec 23 22:19:09 2023 I: “[== ] 9% (42/424 pages)”
Sat Dec 23 22:19:12 2023 I: “[===== ] 19% (84/424 pages)”
Sat Dec 23 22:19:15 2023 I: “[======== ] 29% (126/424 pages)”
Sat Dec 23 22:19:18 2023 I: “[=========== ] 39% (168/424 pages)”
Sat Dec 23 22:19:22 2023 I: “[============== ] 49% (210/424 pages)”
Sat Dec 23 22:19:26 2023 I: “[================= ] 59% (252/424 pages)”
Sat Dec 23 22:19:29 2023 I: “[==================== ] 69% (294/424 pages)”
Sat Dec 23 22:19:32 2023 I: “[======================= ] 79% (336/424 pages)”
Sat Dec 23 22:19:35 2023 I: “[========================== ] 89% (378/424 pages)”
Sat Dec 23 22:19:39 2023 I: “[============================= ] 99% (420/424 pages)”
Sat Dec 23 22:19:39 2023 I: “[==============================] 100% (424/424 pages)”
Sat Dec 23 22:19:39 2023 I: “”
Sat Dec 23 22:19:39 2023 I: “done in 33.561 seconds”
Sat Dec 23 22:19:39 2023 I: “”
Sat Dec 23 22:19:39 2023 I: “Verify 108500 bytes of flash”
Sat Dec 23 22:19:39 2023 I: “[ ] 0% (0/424 pages)”
Sat Dec 23 22:19:41 2023 I: “[== ] 9% (42/424 pages)”
Sat Dec 23 22:19:43 2023 I: “[===== ] 19% (84/424 pages)”
Sat Dec 23 22:19:45 2023 I: “[======== ] 29% (126/424 pages)”
Sat Dec 23 22:19:47 2023 I: “[=========== ] 39% (168/424 pages)”
Sat Dec 23 22:19:49 2023 I: “[============== ] 49% (210/424 pages)”
Sat Dec 23 22:19:52 2023 I: “[================= ] 59% (252/424 pages)”
Sat Dec 23 22:19:54 2023 I: “[==================== ] 69% (294/424 pages)”
Sat Dec 23 22:19:56 2023 I: “[======================= ] 79% (336/424 pages)”
Sat Dec 23 22:19:59 2023 I: “[========================== ] 89% (378/424 pages)”
Sat Dec 23 22:20:01 2023 I: “[============================= ] 99% (420/424 pages)”
Sat Dec 23 22:20:01 2023 I: “[==============================] 100% (424/424 pages)”
Sat Dec 23 22:20:01 2023 I: “”
Sat Dec 23 22:20:01 2023 I: “Verify failed”
Sat Dec 23 22:20:01 2023 I: “Page errors: 424”
Sat Dec 23 22:20:01 2023 I: “Byte errors: 107977”
Sat Dec 23 22:20:01 2023 I: “”
Sat Dec 23 22:20:01 2023 I: The firmware upgrade process failed with status code: 2
Sat Dec 23 22:20:01 2023 I: No devices suitable for upgrade connected.
If I try to firmware upgrade from Otii 3, the GUI indicates that it has been flashing it and then it says “Reconnect device” like shown here:
But reconnecting the device doesn’t help.
Do you know about a workaround for this issue?
BR abaldur